top of page
TO
IDROEPOXY PRIMER
One-component water-based primer composed of resin with additives with special mineral fillers that help adhesion. The material is characterized by its good adhesion capacity on extremely smooth and non-absorbent substrates, such as ceramics, metal surfaces and smooth concrete. The product creates a valid adhesion bridge for liquid coatings and waterproofing products .
FIELDS OF USE
Product designed to improve anchoring on smooth and not very absorbent substrates such as tiled, metal and smooth concrete surfaces. Thanks to the adhesion given by the IDROEPOXY PRIMER, these substrates can then be coated with Opea liquid waterproofing systems and liquid finishes. The product can be applied both indoors and outdoors.
ADVANTAGES
Easy to apply with good yield.
Color
Consumption
Packaging
* The yield depends on the absorption of the substrate.
Glossy and transparent.
1Kg / m2 approximately per min of thickness.
2,5Kg, 5Kg and 10Kg
IDROEPOXY PRIMER CATALYST
WARNING:
TO MERGE
A + B
B.
CHARACTERISTICS OF THE CATALYST
IDROEPOXY PRIMER:
Viscosity at 25 ° C. CPS. = 100: 250
Specific weight at 25 ° C. Kg / dm3 = 1.02
Nature of the catalyst = Modified Aliphatic Amines
Color = Neutral
Solvents = Absent
Stability in closed can at 20 ° C. = Six months
MIXING RATIO
Resin parts by weight = 100
Catalyst Parts by weight = 15
Resin Parts by volume = 100
Catalyst Parts by volume = 28
Viscosity of the mixture at 25 ° C. CPS. = 1500: 2000
Specific weight of the mixture at 25 ° C. Kg / dm3 = 1.33
bottom of page